How to Choose Alive Lighting Guide| Brightness, Equipment type, Care measures Updated: 2026/10/19
See the list of atrium lighting items
the vaults and the inclined ceilingsCeiling height, light distribution, and interchangeabilityThis guide will explain the concept of brightness, light distribution design to spread light, and maintenance methods from the viewpoint of an illustrator.
We will also show you the categories that you can choose immediately.
Table of Contents
Three Great Rules to Avoid Failure in Choosing Astronaut Lighting

Correct calculation method and guide of brightness (lumen) peculiar to high ceilings
the atrium space.DistanceandReduced reflection from the ceiling surfaceAnd it is a place where the lumen required tends to increase even in the same tatami number.
See also: General ceiling.+20 – 30% calculationLet’s choose the degree.
Example: 8 tatami mats equivalent (3,300 – 4,300 lm) → In the atrium4,000〜5,600lmBased on the standard, the brightness is supplemented by the use of multiple lamps of pendant + auxiliary (spot/downlight) lighting.
The concept of light distribution that spreads light (down-concentrated/diffuse type)

Since single-point concentration from a high altitude only brightens the floor and causes unevenness, it is best to use reflected light with spotlights that illuminate the walls, such as diffuse sade, wide-distributed light lenses, and increase the average illuminance of the entire space.
Also, irradiation on walls (especially white walls)Light of the experienceIt is also an effective way to raise it.
Maintenance measures for equipment replacement and cleaning

For hanging pendants from high places, be sure to adjust the cord length and check the equipment such as the elevator. The high places are long life LED and the maintenance times are reduced, but the time of cleaning remains. It is also important to choose a shape that prevents dust from accumulating. It is perfect to consider cleaning methods in preparation.
Recommended lighting fixtures for atrium space explanation by type
Lighting installed in the atrium is important not only for brightness but also for impression when looking up and maintainability. By choosing the most suitable type of equipment, such as pendant, spot, ceiling fan, etc., according to the height and structure of the space, you can ensure a comfortable brightness without compromising the sense of openness.
Here, we will explain the characteristics of each of them and the points of selection.
Pendant light: Installation position and length need to be adjusted (kaname)

In the atrium, the pendant light goes down too much and becomes dazzling, or the living space may become dark by rising too much.
Please consider the balance of the eye line and the interior, and avoid glare, while adjusting the flow line and the height where the light reaches the wall.
See the list of pendant lights.
Spotlight/Downlight: Wall production and auxiliary lighting

If you shine light on walls and beams, you will see the space3D feelingIt is born and improves the experience illuminance. The two-stage design of main lighting + auxiliary lighting can be used comfortably both day and night. There is also a way to use an instrument that can switch the lighting pattern.
[Application] Lighting production to maximize the sense of openness

The charm of the atrium is the sense of escape of the open space that spreads above and below. To enhance that sense of openness, it is important to capture light in terms of surface and height. By utilizing natural light from windows, reflections from walls, and shadow of beams, you can produce a three-dimensional and impressive space regardless of day and night.
How to balance light and lighting in windows
If you have an atrium with plenty of natural light, there is no problem with the brightness level that can be used as auxiliary during the day. Since there is no natural light at night, it is important to design that combines lighting that can take the brightness firmly. Please keep the brightness with light from the wall such as bracket lights.
How to create a three-dimensional feeling using walls and beams

to the beams and the atrium wallsSpotlightorPendant LightThere is also a way to control the light and dark difference between the top and bottom. It is comfortable if the floor plan looks like the image.
Examples are introduced in detail below.
Coordinated examples of inclined ceiling and atrium lighting
Summary
[Checkpoint]
□ From the general ceiling+20 ~ 30% Brightnessso you designed it.
□Diffusion + Wall reflectionso you raised the average illumination.
□Code Length, Cleaning and Replacementwhat did you think?
See the list of atrium lighting items
[Don’t Fail!] Guide to Choosing Living Lighting| Recommended by brightness, instrument type, purpose
[Illustrator’s explanation] 3 lighting techniques that make your living room gorgeous with chandeliers
George Nelson and the History of Bubble Lamp| Herman Miller’s Mid-Century Design
Lighting planning for children’s room| Placement techniques that support concentration and sleep by growth stage
Fascinate with light and design! Pendant Light’s dining style coordination technique [supervised by an illuminator]
Learn from popular articles, how to choose lighting and life wisdom Go to column ranking list
Recommended Content
PICKUP CONTENTS






