How to choose bathroom lighting that doesn’t fail| Difference between moisture-proof and splash-proof and brightness standard updated: 2025/11/02
The bathroom lighting is installed in a special environment, different from the living room or bedroom. Because it is a space exposed to moisture and splashing water, safety is the top priority over fashion.
In recent years, there are more and more stylish designs that can be used in the bathroom, but if you choose a product with insufficient moisture-proof performance, there is a risk of electric leakage and fire. In this article, we will explain the differences between moisture-proof, splash-proof, and waterproof, brightness and color temperature standards, and points to note when replacing bathroom lighting.
Table of Contents
The most important difference between “moisture-proof, splash-proof, and waterproof” in bathroom lighting

When choosing bathroom lighting, you should always check the performance indication of moisture-proof, splash-proof and waterproof. These are similar words, but the meaning is very different.
Moisture proof (moisture-proof)

This is a protection against moisture. It is designed to prevent moisture from entering the bathroom even in a high humidity environment. However, it is not assumed that water is directly applied to it.
Suitable installation location:
Dressing room and bathroom ceiling (away from shower)
Dripproof (splash-proof type)
This structure does not penetrate the interior even if water drops fall into the lighting. It can be used in places where water spray and steam from the shower directly apply.
Suitable installation location:
Bathroom walls and ceilings around shower
3. Choose moisture-proof lighting

The lighting in the bathroom is likely to get wet even with moisture. If you install a non-moisture-proof product in the bathroom, it will break down quickly due to moisture or water. In some cases, it can catch fire, which is very dangerous. Be sure to check whether the product is moisture-proof to use safely.
Waterproof (waterproof type)
The structure is no problem even if submerged in water. In bathroom lighting, it is generally displayed as rainproof type or IP grade.
Suitable installation location:
Directly above the bathtub, inside the shower booth
Protection performance as seen in IP rating

The waterproof and dustproof performance of the lighting is indicated according to the international standard called IP ○ ○. The following grades are standard in the bathroom.
·IP24 or higher: Drip-proof type (resistant to shower splash)
·IP44 or higher: Rainproof type (No problem even if water is poured directly)
·IP65 or above: Fully waterproof (even if submerged in water)
Some common failures include:
moisture-proof
Standards of Brightness and Color Temperature Required for the Bathroom
Brightness guide (Lumen value)
The standard brightness according to the size of the bathroom is as follows:
·1 tsubo (approx. 1.6m2): 300 – 400 lumens
·1.5 tsubo (approx. 2.4 m2): 500 – 700 lumens
·2 tsubo (approx. 3.2m2): 700 – 1000 lumens
Too bright can fatigue your eyes, and too dark can increase your risk of falling, and it’s important to ensure that your feet are bright enough to be visible, especially in homes with older people.
How to choose color temperature

Bulb color (2700K ~ 3000K)
The warm light makes it ideal for relaxing bath time. Recommended for those who often take a bath at night.
Daytime white (around 5000K)
With natural white light, it is suitable for washing your face, making up, or helping your child take a bath.
The professional perspective:
Because bathrooms are often used as a relaxing space, light bulb color is the mainstream. However, daytime white also has the advantage that dirt and water stains are easier to clean.
Types and Features of Bathroom Lighting
Ceiling Direct type (Ceiling light)
An orthodox type that illuminates the entire bathroom evenly. It is mounted directly on the ceiling, making it easy to clean and maintain.
Benefits:
·Light a wide area
·Easy to mount
·Easy to replace lamps
Disadvantages:
There are few design choices.
When the ceiling is low, there is pressure.
Downlight type
It is embedded in the ceiling, giving a clean impression. It is not affected by the opening and closing of the bathroom door.
Benefits:
·Flat ceiling and easy to clean
·High design quality
·Adjustable brightness in multiple installations
Disadvantages:
·Expertise may be required for the exchange
·Difficult to change position after installation
Wall mounted type (bracket light)
This type is mounted on the wall to illuminate the area around the washing area or mirror. It is often used as auxiliary lighting.
Benefits:
·Light around the face brightly (convenient for makeup and shaving)
·Accent the space
Disadvantages:
Not enough to light up the entire bathroom.
·Depending on the installation position, it feels dazzling
Points to pay attention to replacement and maintenance
When changing bathroom lighting, be sure to check the following points:
1. Confirmation of wattage (W) and voltage (V)
Using bulbs that exceed the maximum allowable wattage of existing luminaires can damage the bulbs or cause a fire.
2. Confirmation of the size of the mouth
Check if the bulb’s muzzle size is the right, such as E26, E17.
3. Confirmation of moisture and splash-proof performance
For replacement light bulbs and covers, always choose bathroom compatible products.
Frequency of Maintenance
Bathroom lighting is prone to moisture and dirt, so it needs regular cleaning.
·Cover cleaning: About once a month to wipe off steam and water stains
·Replacement of light bulbs: The life expectancy is about 10 years for LED, about 1 year for incandescent bulbs
·Inspection of the instrument body: Once a year, check for rust or deterioration.
Notes for safety:
Clean or replace the device before turning off the power, because working with wet hands poses a risk of electric shock.
Summary: Choosing bathroom lighting with safety first
Bathroom lighting should be chosen as the top priority to “moisture-proof and splash-proof performance,””brightness” and “maintainability” rather than design.
Check list for choice:
□ Whether there is moisture proof, splash-proof, and waterproof performance according to the installation location
□ Is the brightness appropriate for the size of the bathroom (lumen value)
□ Is the color temperature suitable for the application (bulb color or daytime white)
□ Structure that is easy to replace and maintain
□ Whether the IP rating meets the requirements of the installation location
To create a safe and comfortable bathroom space, be sure to keep the basics of lighting selection.
→ List of bathroom lights and bathroom lights is here
[Don’t Fail!] Guide to Choosing Living Lighting| Recommended by brightness, instrument type, purpose
[Illustrator’s explanation] 3 lighting techniques that make your living room gorgeous with chandeliers
George Nelson and the History of Bubble Lamp| Herman Miller’s Mid-Century Design
Lighting planning for children’s room| Placement techniques that support concentration and sleep by growth stage
Fascinate with light and design! Pendant Light’s dining style coordination technique [supervised by an illuminator]
Learn from popular articles, how to choose lighting and life wisdom Go to column ranking list
Recommended Content
PICKUP CONTENTS






