What is a hanging sealing? Electrician explains the difference in type and installation method Update date: 2025/10/11
When installing ceiling lights, many people may hear the term hikikaku sealing. Although we don’t usually think about it, it is one of the essential elements for safe use of ceiling lights.
In this article, we will explain in detail what kind of ceiling sealing is required when installing ceiling lighting, what kind of sealing is there, and the points when actually installing lighting fixtures, including the perspective of an electrical engineer.
Table of Contents
What is a pull sealing?

Among the methods for installing ceiling lights, the most common one in Japanese houses is the pull sealing. It is installed by plugging the lighting fixture into a pull sealing plug installed in the ceiling beforehand.
Thanks to this mechanism, the lighting fixture can be easily removed or replaced with another fixture.
When a house is newly built or renovated, it is often installed almost as standard during the construction phase, and in most cases, a general sealing shape is installed without special options.
Luminaires manufacturers also sell a large number of lighting with hanging sealing, so there are plenty of design choices.
About the type of hanging seals

There are several types of hanging sealing broadly. As a typical one, let’s keep the following types.
1. Round hook sealing
Literally, a round shaped hanging sealing. It is a common shape and can be attached to a wide range of lighting fixtures such as pendant lights and ceiling lights.
2. Mold Pulling Sealing
The rectangular shape is a draw-down seal. It is compatible with many lighting fixtures as well as the round shape.
3. Embedded-type hanging rosette
It is characterized by a larger width and thinner design compared to the round type. It is a wiring device that is often used for ceilings such as boxes in condominiums and concrete buildings.
Basically, round and square types are the most common, but by checking the shape of the installed rosette, you can see the type of lighting fixture that will be installed.
Round and square sealing are compatible with “pull sealing type” mounting fixtures, and rosette can be installed with “simple mounting type” lighting fixtures in addition to “pull sealing type”.
Advantages of the Pull Ceiling Type
1. Easy installation mechanism
If it is a “draw-down sealing mounting type” lighting fixture, simply plug it into the sealing rosette. Because it is fixed by just hooking and turning, it can be installed relatively smoothly even for first-time users.
2. You can pay even if you are not qualified
Since there is no direct touch of electrical wiring, you can install it safely by yourself if you follow the installation procedure. There is a type of sealing on the instrument side, and it is a mechanism that does not come off easily even in an earthquake.
3. Moving and cleaning are easier.
It is a great advantage to be able to take off and remove the lighting fixtures easily, for example when you want to clean them, or when you are moving.
How to install ceiling lights
When installing ceiling lighting using a pull sealing, you can work more safely and reliably if you hold some points. Here, we will explain the basic flow and precautions in order.
Check the status of the holding sealing
First of all, make sure that the ceiling (rosette) is installed correctly. Specifically, pay attention to the following points:
·Whether there is no rattling or damage
Check if the sealing is not rickety or cracked. If there is a rattling, the screw is suspected to be loose or deteriorated. If there is a problem, see the chapter below,If there is an abnormality in the holding sealing“Please see.
·Whether the switch is off
When installing, make sure to turn off the wall switch and install it.
Check and install the lighting equipment instructions

Every lighting fixture is always accompanied by an operating manual. Specific installation instructions and precautions are described, so be sure to read through it. It is safe to follow the instructions in the manual as below.
1. Check the shape of the plug part of the lighting fixture
Check the printed arrows and grooves to ensure that the lock is firmly placed.
2. Sealing, or plug into the rosette and turn it around
Insert it according to the unevenness, and turn it until there is a “click” sound or response. Please be careful that if you try to turn it in the middle, there is a risk of damage.
3. Checking fixation and adjusting height
In case of pendant light, check the fixation and adjust the height as necessary. In case of ceiling light, check whether the main body is firmly fixed.
4. Check the lights
Turn on the switch and check whether it lights up. Confirm that there is no abnormal flicker or abnormal sound, and it is done.
If there is an abnormality in the holding sealing

If the hanging sealing on the ceiling side is broken or has come out of the missing ceiling, it is recommended to ask an expert (electrician) to inspect and replace it without forcing installation.
When lighting is turned on on the sealing with cracks or chipped, the lighting may fall from the ceiling, so it is important to take action early for safety.
Different types of mounting methods and wiring parts
There are two types of installation methods using a pull sealing, simple installation type and electrical construction type if further divided. Here, we will explain what features and differences are.
What is Simple Installation?

The type of lighting fixtures with a mounting method called simple mounting type corresponds to this simple mounting type. Compared to square sealing, it is characterized by the fact that lighter fixtures can be installed.
The simple installation type equipment can be installed relatively easily on the ceiling where the rosette is installed.
When installing a simple mounting type luminaire on a square sealing, it is necessary to screw the metal fittings attached to the luminaire to the ceiling and fix it. If you do not know the structure of the ceiling and the position of the base, you may have the risk of falling, so you need to check beforehand.
What is an electrical work?
Lighting fixtures installed by connecting electric wiring directly from the ceiling to the lighting fixture without using a hanging ceiling are called electric construction lighting fixtures. When installing such lighting, you need to have a qualification as an electrician.
There are advantages of choosing specially designed interior lights, but you may need to work by an electrician, or a permit may be required for rental properties.
Summary of the hanging sealing

The pull sealing is a part for installing ceiling lights easily and safely. In addition to general round and square sealing, there are rosette types, so you can easily select lighting fixtures by keeping a close touch on the points.
[Point]
·Check the type of ceiling lighting sealing
·Choose from a hanging sealing type for square or round sealing
·Choose a lighting fixture with the appropriate mounting method for the ceiling wiring equipment
·With a rosette, the selection of lighting fixtures expands.
·Heavy lighting is often used for simple installation type and electrical construction type lighting.
Ceiling lighting that can be mounted by hanging sealing is an easy way to implement when changing the atmosphere of your room. When choosing a lighting, check not only the design, but also the installation method and the condition of the hanging sealing, and perform the appropriate construction if necessary.
If,Pendant LightorCeiling Lightsuch asCeiling LightingIf you have any doubts or concerns about installing the device, we recommend you consult with an electrician or lighting manufacturer.
Please refer to this article to understand the mechanism of the hanging sealing, and install ceiling lighting safely.
DON2don 2 Flower Pattern Pendant Light
$137.63 (tax included)To product details of lighting
To product details of lighting


[Don’t Fail!] Guide to Choosing Living Lighting| Recommended by brightness, instrument type, purpose
[Illustrator’s explanation] 3 lighting techniques that make your living room gorgeous with chandeliers
George Nelson and the History of Bubble Lamp| Herman Miller’s Mid-Century Design
Lighting planning for children’s room| Placement techniques that support concentration and sleep by growth stage
Fascinate with light and design! Pendant Light’s dining style coordination technique [supervised by an illuminator]
Learn from popular articles, how to choose lighting and life wisdom Go to column ranking list
Recommended Content
PICKUP CONTENTS





